Shop

  • Colorlight S20 LED Sending Box | 20-Port 4K Sender

    $934.00

    Colorlight S20 LED sending box with 20 Gigabit Ethernet outputs, DP and HDMI 4K inputs, and up to 8.85 million pixels of LED display load. Supports port and sender redundancy.

  • Colorlight S4 LED Display Controller Box | 4 Ethernet Outputs

    $259.00

    Colorlight S4 LED display controller box with HDMI and DVI inputs, four Gigabit Ethernet outputs and up to 2.3 million pixels of LED screen loading. Supports up to 1920 × 1200 input, USB configuration and cascading, and Colorlight receiving cards.

  • Colorlight S6F HD LED Sender Box | 6 Ethernet, 3 Fiber Outputs

    $649.00

    Colorlight S6F HD LED sender box with HDMI/DVI input and loop output. Drive up to 2.3 million pixels through six Gigabit Ethernet ports or three optical fiber outputs; maximum input is 1920 × 1200 at 60 Hz.

  • Colorlight SSR-L16 Brightness Sensor for LED Displays

    Original price was: $57.00.Current price is: $51.00.

    Colorlight SSR-L16 light sensor measures ambient light so a compatible Colorlight LED display system can adjust screen brightness using a configured strategy. Designed for use with the iM9 multifunction card; 0–65,535 lux range, 5 m standard cable and outdoor-ready construction.

  • Colorlight SSR-L29 Light Sensor for LED Display Brightness

    Original price was: $57.00.Current price is: $51.00.

    The Colorlight SSR-L29 measures ambient light so a compatible iM9 system can adjust LED display brightness automatically. It offers a 0–65,535 lux range, a 5 m extendable cable, and an outdoor-ready housing.

  • Colorlight SSR-NOISE Noise Sensor for LED Displays

    Original price was: $285.00.Current price is: $253.57.

    Measure ambient sound levels around an LED display with the Colorlight SSR-NOISE sensor. It covers 30–120 dB, responds in under 3 seconds, and includes a standard 5 m cable. Check the required 5 V or 12 V DC supply and output interface against your controller before ordering.

  • Colorlight SSR-PM PM2.5/PM10 Air Quality Sensor | RS485

    Original price was: $76.00.Current price is: $67.62.

    Colorlight SSR-PM measures PM2.5 and PM10 simultaneously and sends readings over RS485 Modbus-RTU. It offers a 0–6,000 µg/m³ range, 1 µg/m³ resolution and a 5 m standard cable for air quality monitoring projects.

  • Colorlight SSR-SMOG Smoke Sensor for LED Displays

    Original price was: $76.00.Current price is: $67.62.

    Colorlight SSR-SMOG is a ceiling-mounted smoke sensor for LED display monitoring. It measures 0–2000 ppm and communicates over RS485 using Modbus RTU. The unit includes an audible and visual alarm, a 5 m standard cable, and a DC 12 V power adapter.

  • Colorlight SSR-TEMP Temperature & Humidity Sensor | RS485

    Original price was: $57.00.Current price is: $53.00.

    The Colorlight SSR-TEMP temperature and humidity sensor monitors LED display environments through an RS485 interface using Modbus RTU. It measures -40 to 120°C and 0-100% RH, runs on 5-12 V DC, and supports indoor DIN rail, wall, or ceiling mounting.

  • Colorlight T7 LED Display data Transmitting Card

    Original price was: $106.00.Current price is: $102.00.

    ColorLight T7 transmitting LED card adopts better power supply solution, and has better reliability.
    Maximum input resolution of 2048 * 1365 pixels. Two Ethernet port outputs can be set random area of the screen, or control different LED displays.
    ColorLight T7 also supports audio inputs, which is used to transmit the audio to the Multifunction LED card.

  • Colorlight T9 LED Display Screen Data Receiver Card

    Original price was: $26.00.Current price is: $24.90.

    Not Like the conventional Control Cards, ColorLight T9 Don’t Need a Sender Card, Its leading technologies: Super-long screen control, which can’t be realized through the sending card. Synchronous program. Arbitrarily set frame rate of the program.

  • Colorlight VX10 LED Video Controller | 4K Input, 10 Ports

    $1,654.00

    The Colorlight VX10 combines LED video processing and sending in one controller, with 4K HDMI input, 10 Gigabit Ethernet outputs and 2 optical ports. Designed for rental stages and professional LED walls, it supports HDR, layered layouts and flexible backup configurations.

Shopping Cart
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Scroll to Top