The RV804 is the compact optical receiver in this pairing. Its size and module-side output interface differ from the RV803, so compare both the mounting space and the hub connection.
Choosing the fiber option
The product information gives up to 500 m for standard multimode and up to 20 km for the single-mode option. Match the fiber type and optics at both ends; longer-distance configurations require separate confirmation.
Technical specifications
| Parameter | Specification |
|---|---|
| Optical interface | SFP |
| Single-port rate listed | 1 Gb/s |
| Dual-port rate listed | 2 Gb/s combined |
| Multimode reach listed | Up to 500 m |
| Single-mode reach listed | Up to 20 km |
Product images and resources

Frequently asked questions
1. Which version should I choose for an existing fiber run?
Identify the installed fiber as single-mode or multimode, then match both optical modules to it.
2. Can I use the 20 km figure with standard multimode fiber?
The 20 km value belongs to the single-mode option. Standard multimode is listed at up to 500 m.
3. Can I replace an RV803 with an RV804 without checking the cabinet?
Check the board dimensions and output interface. The two receivers differ in these respects.



