The RV803 brings an optical data link to the LED receiver, useful when the sending equipment is far from the cabinet or the cable route is electrically noisy.
Choosing the fiber option
The product information gives up to 500 m for standard multimode and up to 20 km for the single-mode option. Match the fiber type and optics at both ends; longer-distance configurations require separate confirmation.
Technical specifications
| Parameter | Specification |
|---|---|
| Optical interface | SFP |
| Single-port rate listed | 1 Gb/s |
| Dual-port rate listed | 2 Gb/s combined |
| Multimode reach listed | Up to 500 m |
| Single-mode reach listed | Up to 20 km |
Frequently asked questions
1. Which version should I choose for an existing fiber run?
Identify the installed fiber as single-mode or multimode, then match both optical modules to it.
2. Can I use the 20 km figure with standard multimode fiber?
The 20 km value belongs to the single-mode option. Standard multimode is listed at up to 500 m.
3. Can I replace an RV803 with an RV804 without checking the cabinet?
Check the board dimensions and output interface. The two receivers differ in these respects.



