JPS225V5.0-GS LED display power supply
The G-Energy JPS225V5.0-GS is a +5.0V DC power supply for LED displays with a listed output current range of 0–40.0A and 100–240Vac input. Its natural-cooling installation requires an external aluminum plate for auxiliary heat dissipation.
Technical specifications
| Parameter | Specification |
|---|---|
| Model | JPS225V5.0-GS |
| Total output power, as listed | 225W |
| Rated input voltage | 100–240Vac |
| Output voltage | +5.0Vdc |
| Output current range | 0–40.0A |
| Voltage regulation accuracy | ±2% |
| Ripple and noise | ≤150mVp-p |
| Working temperature | −30°C to 40°C, with the specified auxiliary cooling plate |
| Auxiliary aluminum plate (L × W × H) | 200 × 145 × 3 mm |
| Storage temperature | −40°C to 80°C |
| Relative humidity | 10–50% |
| Cooling method | Natural cooling |
| Atmospheric pressure | 80–106kPa |
| Altitude | 2000m |
| Listed protections | Input undervoltage, output current limiting and output short circuit |
Rating clarification: The original listing and the PDF’s main specification table give 225W, +5.0V and 0–40.0A. These entries are retained as supplied; do not derive a higher output current from the 225W figure. Confirm the usable load rating for the supplied revision before installation.
Cooling and fit
Provide the specified 200 × 145 × 3 mm auxiliary aluminum plate and check the unit’s mounting arrangement, terminals and output requirements against the existing display. Contact us with the full model label if you need replacement identification.
Product photos and PDF download
Download Specification:
G-Energy JPS225V5.0-GS LED Display Power Supply Specification
Frequently Asked Questions
What voltage and current are listed for the JPS225V5.0-GS?
The listed output voltage is +5.0V DC and the output current range is 0–40.0A.
Does the 225W listing mean I can draw more than 40A?
Do not infer a higher current from that figure. The original listing and PDF specify 0–40.0A alongside the 225W entry. Confirm the supplied revision’s usable load rating before selecting the load.
Does this power supply need an additional cooling plate?
Yes. The specification requires an external aluminum plate measuring 200 × 145 × 3 mm for auxiliary heat dissipation.
What is the working temperature range?
The listed working range is −30°C to 40°C with the specified auxiliary cooling plate. Storage is listed as −40°C to 80°C.
Where can I find the specification and product photos?
The original photos and specification PDF are retained above. The linked document is marked JPS225V5.0-GS V1.0, dated 2015/05/20; check that it matches your supplied revision.
