HUB12A LED HUB Card Overview
The HUB12A LED HUB card is an LED display hub board with the 16-pin interface definition shown below. Use the pinout and product photographs to compare the board with your existing LED display connection before choosing a replacement.
The interface lists OE, A, B, C, D, CLK, LAT, RD, GD and GND signal labels. Compatibility should be checked against the actual controller, LED module and cable pin assignments; a matching connector shape alone is not enough to confirm suitability.
16-Pin Interface Definition
This table preserves the listed HUB12A pin numbers and signal labels. It is a pin assignment reference, not a connector orientation drawing. Confirm the pin 1 marking on the actual board before connecting a cable.
| Pin | Signal | Pin | Signal |
|---|---|---|---|
| 1 | OE | 2 | A |
| 3 | GND | 4 | B |
| 5 | GND | 6 | C |
| 7 | GND | 8 | CLK |
| 9 | GND | 10 | LAT |
| 11 | GND | 12 | RD |
| 13 | GND | 14 | GD |
| 15 | GND | 16 | D |
Check Compatibility Before Ordering
- Confirm the model: compare the HUB12A designation and board layout with your existing hub card. The product SKU is HUB-12A.
- Compare every pin: check the controller and LED module documentation against the complete 16-pin table above, including pin 16 (D).
- Check the physical connection: compare connector placement, cable orientation and mounting arrangement with the product photographs.
- Verify system requirements: confirm electrical requirements, scan configuration and controller compatibility for your installation before applying power.
A supported-controller list, operating voltage and maximum pixel load are not specified here. If you need help selecting this board, contact us with your controller model, LED module details and clear photographs of the existing hub card and connectors.
HUB12A Product Photos


Frequently Asked Questions
What is the HUB12A pinout?
The 16-pin interface assigns OE to pin 1; A, B and C to pins 2, 4 and 6; CLK to pin 8; LAT to pin 10; RD to pin 12; GD to pin 14; and D to pin 16. Pins 3, 5, 7, 9, 11, 13 and 15 are GND.
Will this LED hub card work with my controller?
Compatibility requires a match between the controller, module, cable wiring and hub card pinout. Check the signal assignments and system requirements before ordering; the HUB12A model name does not establish universal compatibility.
What information should I provide for a replacement check?
Provide the existing board model, photographs of both sides and connector markings, plus the controller and LED module model numbers. These details help identify the connection that needs to be matched.








