The NovaStar A10s Pro is a small, fully featured high-end LED receiving card from the NovaStar Armor series. One card drives up to 512 x 512 pixels at 60Hz and combines Dynamic Booster, Full-Grayscale Calibration, Image Booster and HDR10/HLG support – the exact mix of features installers need for bright, uniform and lifelike images on professional LED video walls, rental screens and high-density cabinets.
NovaStar A10s Pro key specifications
| Item | Specification |
|---|---|
| Model | NovaStar A10s Pro LED receiving card |
| Series | NovaStar Armor series, high-end small receiving card |
| Maximum resolution | 512 x 512 @ 60Hz per card (262,144 pixels) |
| HDR formats | HDR10 and HLG (with an HDR-capable sending card) |
| Grayscale | 65,536 levels (16-bit) processing; 22bit+ improves grayscale by up to 64 times |
| Calibration | Full-Grayscale Calibration plus pixel-level brightness and chroma calibration |
| Data outputs | Up to 32 groups of parallel RGB data or 64 groups of serial data (expandable to 128 groups) |
| Latency | As low as 1 frame (with a driver IC that has built-in RAM) |
| Input voltage | DC 3.3V – 5.5V (5.0V recommended) |
| Rated current / power | 0.5A / 2.5W |
| Dimensions | 80.0 x 45.0 x 8.0 mm (PCB thickness max 2.0 mm, total thickness max 8.5 mm) |
| Net weight | 22.8 g |
| Operating temperature | -20C to +70C |
| Operating humidity | 10% RH to 90% RH, non-condensing |
| Certifications | RoHS, EMC Class B |
| Control software | NovaLCT V5.4.0 or later (V5.2.0 or later for most management features) |
| Packing | Anti-static bag and anti-collision foam per card; 40 cards per box |
Why choose the NovaStar A10s Pro receiving card?
Four NovaStar display technologies do most of the work, and each one solves a different problem on site:
- Dynamic Booster – significantly improves display contrast and image detail while effectively controlling and lowering display power consumption.
- Full-Grayscale Calibration – every grayscale level of the input source has its own calibration coefficients, so brightness and chroma stay uniform in high brightness, mid-grayscale and low-grayscale scenes at the same time.
- Image Booster – three functions in one. Color Management switches the screen colour gamut in real time, Precise Grayscale corrects the 65,536 individual 16-bit grayscale levels of the driver IC to remove brightness spikes, dips, colour cast and mottling, and 22bit+ improves LED grayscale by 64 times so dark areas keep their detail.
- HDR10 and HLG – paired with an HDR-capable sending card, the A10s Pro parses HDR video sources and reproduces the original brightness range and colour space for a more lifelike image.
More image controls on the NovaStar A10s Pro
- Pixel-level brightness and chroma calibration for consistent colour across the whole screen.
- Quick adjustment of dark or bright lines caused by module or cabinet splicing, with immediate effect.
- Latency as low as one frame, ideal for live events and camera-facing screens.
- 3D output when working with a 3D-capable sending card.
- Individual gamma adjustment for red, green and blue.
- Image rotation in 90 degree increments (0/90/180/270), plus rotation at any angle with SmartLCT and the MCTRL R5 controller.
Reliability, monitoring and service features
- Dual card backup – two A10s Pro cards can share one hub board, and the backup takes over immediately if the primary card fails. Both cards are monitored in NovaLCT V5.2.0 or later.
- Loop backup – the screen keeps displaying normally even if one cable path fails.
- Dual backup of configuration parameters, firmware and calibration coefficients, stored in both the application area and the factory area.
- High-density connectors and an EMC Class B hardware design limit the effects of dust and vibration for higher stability on site.
- Temperature and voltage monitoring, bit error detection and dual power supply status detection without extra peripherals.
- Module Flash management and automatic module calibration upload stored coefficients as soon as a replacement module is powered on.
- Mapping function shows the sending card, Ethernet port and receiving card numbers on the cabinets so you can see the connection topology at a glance.
- Custom pre-stored image for start-up, or for when the Ethernet cable is disconnected or no video signal is available.
- LVDS transmission (dedicated firmware) reduces the number of data cables from the hub board to the module and improves signal quality.
Compatible sending cards, software and driver ICs
The A10s Pro is a receiving (receiver) card, so it works as part of a complete NovaStar control chain:
- Sending cards and controllers: any NovaStar sending card or controller that supports the functions you need, such as HDR, 3D or individual gamma adjustment. The A10s Pro is widely used with NovaStar MX series control systems and MCTRL-series controllers.
- Control software: NovaLCT V5.4.0 or later is required for Image Booster. Bit error detection, firmware readback, parameter readback and dual card status monitoring need NovaLCT V5.2.0 or later.
- Driver ICs: the visual result of Image Booster and 22bit+ depends on the LED driver IC fitted to your modules, so confirm the driver IC before ordering.
- Cabinet and hub board: the card uses high-density connectors, and the gap between the A10s Pro and the hub board is 5.0 mm – NovaStar recommends a 5 mm copper pillar. The mounting holes have GND enabled.
How to install and set up the NovaStar A10s Pro
- Mount the card. Power the cabinet down and fit the A10s Pro onto the hub board using the high-density connectors and a 5 mm copper pillar.
- Connect the data path. Link the Gigabit Ethernet input from the sending card or from the previous cabinet in the chain. The A10s Pro has two Gigabit ports, so daisy-chaining and loop backup are both supported.
- Power the card. Feed it from the cabinet 5 V rail (rated input DC 3.3V – 5.5V, 0.5A).
- Configure in NovaLCT. Set the cabinet resolution, scan mode, driver IC and data routing, keeping the load within 512 x 512 @ 60Hz per card.
- Calibrate. Upload the calibration coefficients and run a full-grayscale calibration so brightness and chroma are uniform across the whole screen.
- Verify. Check the indicators: a green running LED flashing once per second means the card, the cable and the video source are all good, and a steady red power LED confirms normal power input. Then use the mapping function to confirm the topology.
Which NovaStar receiving card should you choose?
The A10s Pro is the top-tier small Armor-series card. Choose it when you need 512 x 512 @ 60Hz per card with HDR, full-grayscale calibration and the strongest image processing NovaStar offers in a compact footprint.
- Need a larger canvas per card or the newest Armor features? Compare the NovaStar A10s Plus / A10s Plus-N receiving card.
- Working to a tighter budget on a 512 x 512 screen? The NovaStar A8s Pro and the NovaStar A7s Plus are popular alternatives.
- Building small cabinets with mini modules? Look at the Novastar Armor A5S Plus mini receiving card.
- Need a universal small-size card with HUB75E output? See the NovaStar MRV208-N, or browse the full LED receiving card range.
Not sure which card matches your cabinet? Send us the cabinet resolution, scan mode and driver IC through our contact page and our engineers will confirm compatibility before you order.
NovaStar A10s Pro FAQ
What is the NovaStar A10s Pro?
The NovaStar A10s Pro is a small, high-end LED receiving card in NovaStar Armor series. It controls up to 512 x 512 pixels at 60Hz per card and adds Dynamic Booster, Full-Grayscale Calibration, Image Booster and HDR10/HLG support for professional indoor and outdoor LED displays.
What is the maximum resolution of the A10s Pro receiving card?
Each NovaStar A10s Pro supports up to 512 x 512 pixels at 60Hz, which is 262,144 pixels per card. Larger screens simply use more receiving cards, each one driving its own section of the display.
Does the A10s Pro support HDR?
Yes. The A10s Pro supports HDR10 and HLG, but only when it is paired with a sending card that also supports HDR. In that setup it reproduces the original brightness range and colour space of the source for a more lifelike image.
Which sending cards and software work with the A10s Pro?
Use it with a compatible NovaStar sending card, controller and LED driver IC. Configuration is done in NovaLCT: V5.4.0 or later for Image Booster, and V5.2.0 or later for bit error detection, firmware readback and dual card monitoring.
Is the NovaStar A10s Pro the same as the A10s Plus?
No, they are different cards. The A10s Pro is the high-end 512 x 512 @ 60Hz Armor-series card described on this page. The A10s Plus is a separate, newer model in the same family with a different feature set. If you are unsure which one suits your cabinet, ask us first.
Is the A10s Pro suitable for outdoor LED displays?
Yes, provided the cabinet itself is rated for outdoor use. The A10s Pro operates from -20C to +70C at 10% to 90% RH, uses high-density connectors to resist dust and vibration, and carries an EMC Class B hardware design for demanding sites.
Can I use the A10s Pro as a backup card?
Yes. Two A10s Pro cards can be mounted on a single hub board for dual card backup. If the primary card fails, the backup serves immediately, and the status of both cards can be monitored in NovaLCT V5.2.0 or later.
How many A10s Pro cards are in one box?
Each card ships in its own anti-static bag with anti-collision foam, and one NovaStar packing box holds 40 A10s Pro receiving cards. The box measures 378.0 x 190.0 x 120.0 mm.
What does one A10s Pro cost and how fast does it ship?
One NovaStar A10s Pro receiving card is $54.00 and is in stock now. Order a single card or a full box of 40, and use the shipping options at the top of this page for worldwide delivery.
What is included with each A10s Pro receiving card?
One genuine NovaStar A10s Pro LED receiving card, packed in an anti-static bag with anti-collision foam. Cabinets, hub boards, sending cards and cables are not included. Stock, price and shipping options for this listing are shown at the top of the page.
NovaStar A10s Pro product images
Download the NovaStar A10s Pro specification
Official NovaStar A10s Pro receiving card specifications, document version V1.1.2 (PDF): download the A10s Pro specification PDF.
You can also read more about the manufacturer on the official NovaStar website.
NovaStar is a registered trademark of Xi an NovaStar Tech Co., Ltd. The figures above are taken from NovaStar official A10s Pro receiving card specification V1.1.2. Actual performance depends on the sending card, driver IC, firmware and cabinet design. See all NovaStar products.
