ColorLight IQ7 HD Sender is specially designed for large LED displays. Q7 supports DVI and HDMI video input, the maximum input resolution of 2560 * 1600 pixels, and contains four Ethernet port outputs.
ColorLight IQ7E UHD sender specially designed for the high-end LED display. It has the largest receiving capability for 4k, user-friendly control panel, and LCD.
ColorLight IT7 sender card pioneered to integrate the dual-USB interfaces to realize high-speed communication with PC and easy cascading between
sender cards. It supports wide working voltage with DC3.8-12V and has good stability and compatibility with all Colorlight’s control cards.
Colorlight K5+ card can handle up to 512×384 pixels and can support up to 32 groups of parallel or serial data. The card is dustproof, shockproof, and highly stable, making it ideal for use in high-end rental displays or ED screens
colorlight K5H is a small-sized high-end general-purpose receiving card launched by Colorlight. A single card can carry a maximum of 512X384 pixels, support up to 32 sets of parallel data or 32 sets of serial data, and can be expanded to 128 sets of serial data. The size is only 70.0×45.0x7.8mm, which is suitable for small cabinet space and small spacing application scenarios; it adopts high-density connector interface, dustproof and shockproof, and has high stability and reliability.
Adopt direct-reading decibel noise level detection module developed by the original imported sound sensor; Multi-points calibration craft with high detection accuracy and sensitivity; available for embedding other equipment; Core components of circuits of the main board are totally shielded for beauty and strong anti-interference capability; Various output types are reserved for all kinds of application integrations.
This product has been no longer in production, and our recommended alternatives are as follows:
Colorlight N6 is an ultra small receiving card launched by Colorlight for outdoor fixed display and LED lighting screen. N6 single card can carry a maximum of512 X 384 pixels and support up to 24 groups of parallel data or 64 groups of serial data. The size is only
66.0X 25.4×8.4mm, suitable for application scenarios such as light bar screen, mesh screen, point light source, special-shaped screen, et., which can efectively save design space, reduce screen structure design and reduce design dfficulty.
OP1 fiber optic transceiver realizes the conversion between Ethernet twisted pair and Ethernet optical signal, and the transmission distance is 10km. Support 802.3i, 802.3j, 802.3u, 802.3z, 802.3ab and other standard protocols. This series of products is designed to support link failure alarm, wide operating temperature range, port and power supply lightning protection, etc., to meet the deployment requirements in outdoor monitoring environments such as rail transit, safe cities, and intelligent transportation.
OP4 is a fiber optic transceiver specially designed to meet the long-distance transmission occasions of LED displays. It is small in size and light in weight, and can be easily installed on the back or inside of the screen. At the same time, all its interfaces are on the same side of the body, which is convenient for wiring. . OP4 has long transmission distance, high working stability, supports photoelectric two-way conversion, can be used without setting, and can be widely used in different fields such as radio and television, data centers, and monitoring centers.
Fiber optical transceiver is customized according to telecommunication level. Applicable to remote transmission and control on LED screen.
There are single-mode and multi-mode, etc equipments.