Quick answer: NovaStar RCFG RCFGX files store receiving-card parameters for an LED display module or cabinet. This page provides 50 free ZIP packages for indoor fixed, outdoor fixed and rental LED screens, plus a practical guide to choosing and loading the correct file in NovaLCT.
Use a download only when the display application, pixel pitch, module resolution, driver IC, scan mode, receiving card, hub board and data route match your hardware. A file chosen by pixel pitch alone can produce a black screen, repeated image, incorrect colors or unstable scanning.
What Is a NovaStar RCFG or RCFGX File?
An RCFG or RCFGX file is a saved receiving-card configuration used by NovaStar’s NovaLCT software. It can contain module dimensions, receiving-card parameters, driver and scan settings, data-group information, cabinet mapping and related display behavior. NovaLCT loads the prepared settings and sends them to the LED receiving cards.
These files are configuration files, not controller firmware. The newer RCFGX format is common in current NovaLCT workflows, while RCFG is also found with older software and equipment. The correct choice depends on the NovaLCT version and the specific hardware combination.
| Format | Typical use | What to check |
|---|---|---|
| RCFGX | Common in current NovaLCT receiving-card workflows | NovaLCT version, controller, receiving card and exact module design |
| RCFG | Legacy software or older equipment | Whether the target NovaLCT version and hardware accept the format |
NovaStar RCFG RCFGX Files Free Download Library
Choose the display application first, then select the pixel pitch. Each link opens a ZIP package that may contain one or more receiving-card configuration files. Extract the package locally before loading an .rcfg or .rcfgx file in NovaLCT.
Download categories: outdoor fixed, indoor fixed, general rental, indoor rental and outdoor rental LED screens.
Outdoor Fixed LED Display RCFGX Files
| Pixel pitch | Display application | RCFGX package |
|---|---|---|
| P2.5mm | Outdoor Fixed LED Display | Download ZIP |
| P2.604mm | Outdoor Fixed LED Display | Download ZIP |
| P2.976mm | Outdoor Fixed LED Display | Download ZIP |
| P3mm | Outdoor Fixed LED Display | Download ZIP |
| P3.33mm | Outdoor Fixed LED Display | Download ZIP |
| P3.91mm | Outdoor Fixed LED Display | Download ZIP |
| P4mm | Outdoor Fixed LED Display | Download ZIP |
| P4.81mm | Outdoor Fixed LED Display | Download ZIP |
| P5mm | Outdoor Fixed LED Display | Download ZIP |
| P5.33mm | Outdoor Fixed LED Display | Download ZIP |
| P6mm | Outdoor Fixed LED Display | Download ZIP |
| P8mm | Outdoor Fixed LED Display | Download ZIP |
| P10mm | Outdoor Fixed LED Display | Download ZIP |
| P16mm | Outdoor Fixed LED Display | Download ZIP |
Indoor Fixed LED Display RCFGX Files
| Pixel pitch | Display application | RCFGX package |
|---|---|---|
| P0.9375mm | Indoor Fixed LED Display | Download ZIP |
| P1.25mm | Indoor Fixed LED Display | Download ZIP |
| P1.538mm | Indoor Fixed LED Display | Download ZIP |
| P1.579mm | Indoor Fixed LED Display | Download ZIP |
| P1.667mm | Indoor Fixed LED Display | Download ZIP |
| P1.86mm | Indoor Fixed LED Display | Download ZIP |
| P1.875mm | Indoor Fixed LED Display | Download ZIP |
| P1.953mm | Indoor Fixed LED Display | Download ZIP |
| P2mm | Indoor Fixed LED Display | Download ZIP |
| P2.5mm | Indoor Fixed LED Display | Download ZIP |
| P2.604mm | Indoor Fixed LED Display | Download ZIP |
| P2.976mm | Indoor Fixed LED Display | Download ZIP |
| P3mm | Indoor Fixed LED Display | Download ZIP |
| P3.076mm | Indoor Fixed LED Display | Download ZIP |
| P3.91mm | Indoor Fixed LED Display | Download ZIP |
| P4mm | Indoor Fixed LED Display | Download ZIP |
| P5mm | Indoor Fixed LED Display | Download ZIP |
| P6mm | Indoor Fixed LED Display | Download ZIP |
| P7.62mm | Indoor Fixed LED Display | Download ZIP |
| P10mm | Indoor Fixed LED Display | Download ZIP |
Rental LED Screen RCFGX Files
| Pixel pitch | Display application | RCFGX package |
|---|---|---|
| P2.604mm | Rental LED Screen | Download ZIP |
| P2.976mm | Rental LED Screen | Download ZIP |
| P3.91mm | Rental LED Screen | Download ZIP |
| P4.81mm | Rental LED Screen | Download ZIP |
| P5.95mm | Rental LED Screen | Download ZIP |
| P6.25mm | Rental LED Screen | Download ZIP |
Indoor Rental LED Screen RCFGX Files
| Pixel pitch | Display application | RCFGX package |
|---|---|---|
| P1.953mm | Indoor Rental LED Screen | Download ZIP |
| P2.604mm | Indoor Rental LED Screen | Download ZIP |
| P2.976mm | Indoor Rental LED Screen | Download ZIP |
| P3.91mm | Indoor Rental LED Screen | Download ZIP |
| P4.81mm | Indoor Rental LED Screen | Download ZIP |
| P6.52mm | Indoor Rental LED Screen | Download ZIP |
Outdoor Rental LED Screen RCFGX Files
| Pixel pitch | Display application | RCFGX package |
|---|---|---|
| P2.604mm | Outdoor Rental LED Screen | Download ZIP |
| P2.976mm | Outdoor Rental LED Screen | Download ZIP |
| P3.91mm | Outdoor Rental LED Screen | Download ZIP |
| P4.81mm | Outdoor Rental LED Screen | Download ZIP |
How to Choose the Correct RCFGX File
A correct NovaStar configuration matches the complete LED module and cabinet design. Verify every item in this table rather than relying on the pixel-pitch label alone.
| Match factor | Why it matters | How to confirm |
|---|---|---|
| Display application | Fixed and rental cabinets can use different wiring and layouts. | Check whether the screen is indoor/outdoor and fixed/rental. |
| Pixel pitch | Narrows the package list but is not a complete match. | Read the module label or product specification. |
| Module size and resolution | Controls how pixel data maps to each module. | Confirm physical dimensions and width x height in pixels. |
| Driver IC and scan mode | A mismatch can cause lines, flicker, incorrect color or no image. | Check the module specification or IC markings. |
| Receiving card and hub board | Hardware support and connector layout must agree. | Record the exact model numbers and connector layout. |
| Data route and cascade order | Determines how image data travels through the cabinet. | Compare with the cabinet wiring diagram or a working cabinet. |
| NovaLCT compatibility | Software and hardware generations may support different formats. | Use a NovaLCT version supported by the controller and receiving card. |
If a parameter is unknown, request the original configuration from the LED module or cabinet supplier. Clear photos of the module label, driver IC, receiving card and hub board make identification more reliable.
How to Load RCFG or RCFGX Files in NovaLCT
- Install a NovaLCT version supported by your NovaStar controller and receiving card.
- Connect the control computer to the controller and confirm that the receiving cards are online.
- Read the current receiving-card parameters and save a backup file before changing anything.
- Download and extract the required ZIP package on the local computer.
- Open the receiving-card configuration area in NovaLCT and load the
.rcfgor.rcfgxfile. - Review the module resolution, scan/driver parameters, cabinet layout and data flow before sending.
- Send the configuration to one test cabinet or a limited test area first.
- Check the image, color order, scan behavior, brightness and refresh performance. Save to hardware only after the test is correct.
RCFG/RCFGX Troubleshooting
| Symptom | Likely area to check | Recommended next step |
|---|---|---|
| Screen stays black | Power/data connection, module parameters or data route | Restore the backup, confirm hardware is online, then re-check the full match. |
| Image repeats or shifts | Module resolution, data groups or cascade order | Compare the loaded values with the module specification and wiring diagram. |
| Colors are wrong or swapped | Driver IC, RGB order or module type | Stop the full-screen send and use the supplier-approved configuration. |
| Flicker or bright lines | Scan mode, driver timing or IC mismatch | Restore the working file and verify the driver/scan combination. |
| Only some cabinets work | Mixed hardware, inconsistent configuration or cabinet mapping | Read back and compare a working cabinet with an affected cabinet. |
| NovaLCT cannot open the file | ZIP not extracted, unsupported format/version or damaged download | Extract the ZIP, use a supported NovaLCT version and download the package again. |
Frequently Asked Questions
Are NovaStar RCFG RCFGX files universal?
No. A configuration is created for a specific combination of LED module, driver IC, scan mode, receiving card, hub board and cabinet wiring. The same pixel pitch does not guarantee compatibility.
Can I choose an RCFGX file using pixel pitch only?
No. Pixel pitch is only the first filter. Match the module resolution, driver/scan design, receiving-card model and cabinet data route before loading the file.
What is the difference between RCFG and RCFGX?
Both store receiving-card configuration data. RCFGX is common in current NovaLCT workflows, while RCFG also appears in legacy systems. Use the format supported by your NovaLCT version and hardware.
What should I do if I do not have the original configuration?
If part of the screen still works, read and save the receiving-card parameters from a known-good cabinet before making changes. Otherwise, contact the module or cabinet supplier with clear hardware photos and model numbers.
How do I test a downloaded file safely?
Back up the current file, send the replacement to one cabinet or a controlled test area, inspect the complete image and scan behavior, and only then apply it to the full screen.
Are the RCFGX downloads on this page free?
Yes. The 50 ZIP packages listed here can be downloaded without payment. They are provided as configuration references and still require a complete hardware match.
Sources and Update Notes
- Download source: ZIP packages hosted by EagerLED and organized here by display application and pixel pitch.
- Page review date: August 27, 2026.
Need help identifying a receiving card or matching a configuration? Use the contact page and include the module label, driver IC, receiving-card model, hub board and cabinet wiring photos.
