The static and dynamic scanning of LED display screens correspond to each other. Generally speaking, real-pixel LED display screens refer to each of the red, green and blue light-emitting tubes that make up the display screen and only participate in the imaging of one pixel. To obtain sufficient brightness. Today, I will introduce the difference between static and scanning […]
In the LED electronic display, the driver IC’s role is to receive the display data in accordance with the protocol (from the receiver card or video processor and other information sources), produce internal PWM and current time variation, output and brightness and grayscale refresh related to the PWM current to light the LED. The display’s […]
How to judge the LED transparent screen good or bad? Some people say that through the appearance can be roughly judged by the quality of the box, is this really so? brightness comparison The acrylic plate close to the same number of modules and then slowly enhance a small distance, during which to watch the […]
Information visualization as the main thrust of today’s traffic control command center, in order to improve its traffic management level, enhance emergency command, daily management efficiency, strengthen dynamic control and management, to truly meet the requirements of business combat, ultra-high-definition display, high refresh rate of the small pitch LED display for the leading entry into the display […]
The display quality of the LED display has always been closely related to the constant current driver chip, such as ghosting, dead pixel cross, low gray cast, dark first scan, high contrast coupling, etc., while the line drive is not as a simple scanning requirement Pay attention. The display quality of LED displays has always been closely […]
